FreeBSD the next step – update 2

By finndo On April 5, 2010 · Leave a Comment

this may get a bit repetitive with me re-listing everything, so instead I am just going to link to the first post that has the list of things to do… note I have added a couple of things at the bottom so the [...]

this may get a bit repetitive with me re-listing everything, so instead I am just going to link to the first post that has the list of things to do… note I have added a couple of things at the bottom so the numbers now go past 20…

 

1. 75% in progress, troubleshooting and more testing needed.  I have gotten my user added the the “VirtualBox” user group, but I get this error when I try to execute VirtualBox from the command line ”VirtualBox: supR3HardenedExecDir: couldn’t read “”, errno=2 cchLink=-1“  I tried loading VirtualBox from KDE and it was loading for about 12 seconds then nothing happend, also it did not install a manual page.  I’ll have to do some forum surfing to figure this one out.  this exact error is referrenced in the FreeBSD handbook noting that it should only occur if you are using an older version on VirtualBox.

2. 0% not started.  no updates yet, holding off till I get some of these other tasks complete.

3. 100% complete.  everything is automounting at bootup and it is doing it where I want it to.

4. 100% complete.  I am working almost exclusively via ssh now and can connect to it remotely as tested via an Android cell phone ssh client (props to connectbot)

5. 10% in progress, researched only.  Chrome can be installed as a Debian, Ubuntu, openSUSE, or Fedora package, I just need to set my system up to handle RPMs and I might be able to get it to install, hopefully the newest version will work easier than last august when everyone was trying to hack the install to make it work, especially since every forum I went to never had a successful complete port available and there were no posts from 2010 and the maintainer of the hacked port is not doing updates anymore except those that match his specific system configuration.

6. duplicate issue.  going to delete this one, as #19 and #20 pretty much sum it up.

7. 30% in progress, trouble shooting and additional testing required.  as noteded else where VirtualBox is installed but not able to run, and I have not started on VMWare.

8. 100% complete.  Firefox 3.6.2 is installed and operational.

9. 90% in progress, trouble shooting and more testing needed.  self testing shows that a user is able to ssh in and access the drives, but is not able to ftp in and access the drives.  I used “sudo ln -s /mnt/<directory> /home/<user>/<directory>” I haven’t used links much and need to see if the -s (symbolic) is what is preventing the user from accessing the data via ftp.

10. 0% not started.  no updates yet, holding off till I get some of these other tasks complete.

11. 20% in progress, 1 out of 5 drives is currently running with GPT.  the new 1.5TB drive was setup with GPT when installed into the system.  the new 500GB drive (FreeBSD boot drive) is still MBR as the FreeBSD fdisk application did not have an option for setting the drive boot record to GPT, although I have found documentation on converting the FreeBSD boot drive to GPT.

12. 0% in progress, initial research turned up nothing useful.

13. -30% not started, situation worsening, additional packages labeled as “gnome-xxxx” or “xxxxx-gnome” have been added as dependencies during other package installations. 

14. 10% in progress, initial research has turned up useful information; however I am not currently in a possition to proceed.

15. 0% not started.  no updates yet, holding off till I get some of these other tasks complete.

16. 0% not started.  no updates yet, holding off till I get some of these other tasks complete, will require at least one of #’s 1, 2, 7, or 15 to be complete before work can begin.

17. 0% not started.  no updates yet, holding off till I get some of these other tasks complete, not a priority and very near the bottom of the list of things to do.

18. 40% in progress.  Still leaning towards rsync, but I have been researching into using dump and I think it will do what I want it to.

19. 60% in progress, I thought I had it installed, but when I went to the test if you have java installed page of www.java.com it failed to test my java installation (might need to add the plugin for firefox, will check); however the java download page only lists “Windows, Mac OS, and Linux” as OS choices, so I will have to do more research.

********update – I am making a java install page because this was such a pain in the rump to do.***********

20. 40% in progress, I thought I had it installed, but when I went to hulu it told me I need java 10.0.22, also amd.com told me I need the flash plugin installed; however again there is no FreeBSD listing on the download page as a supported OS, so I will have to do more research.

21. 100% complete.  (I know I added this one) get Yakuake working in KDE, well I did a “sudo pkg_add -r yakuake” and it started downloading, it has about 6 dependencies and those had about 150 dependencies, most of which I already had installed.  the problem I saw was it force downloaded KDE 3.5 and all of it’s dependencies, I hope that doesn’t screw anything up.  If I remember correctly from when KDE 4.0 first came out they specifically named the port KDE4 instead of just KDE so that there would not be conflicts on systems that had both versions installed.  after it finished I ran a “sudo pkgdb -F” it found a lot of stale dependencies and fixed them, one thing I noticed fly by was Firefox 3.0.## which tells me I need to check my Firefox and see if it is 3.0 or 3.6…

22. 10% researched only.  Get Picasa installed and working, this will be just like chrome and will require using RPM packages.

23. 100% complete.  as part of #5 and #22 (and because I always install this on FreeBSD, but it failed during initial OS installation for some reason) I am installing the linux compatibility/emulation pack.  I’ll do a brief post on this and link it here.

Tagged with: • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
 

Thoughts on Linux…

By finndo On February 22, 2010 · Leave a Comment

start off with some non-techie stuff first…

I head back to see my surgeon next Monday,  where he will tell me that in another week or two I should start putting some weight on my leg (toe touch, or partial weight bearing?) when at my PT.  I am also hoping he [...]

start off with some non-techie stuff first…

I head back to see my surgeon next Monday,  where he will tell me that in another week or two I should start putting some weight on my leg (toe touch, or partial weight bearing?) when at my PT.  I am also hoping he will tell me it is okay to get my incision wet, as it has been making it very difficult to take showers!

ok, on to the good stuff.

So, I am not at home and do not have my desktop machine available for use for the last week, I have been going through withdrawal…  but having to work on someone else’s machine, and my wife’s laptop (I think I mentioned before, I gave her mine, and sold her old one) has taught me one important lesson, why I prefer Linux.

My number one reason for preferring Linux over Windows is system maintenance.  What do I mean? well, I mean keeping everything up to date, this latest round of Adobe patching should make this make sense to everyone.  I don’t use Acrobat on my Linux machines for this reason.  However; back to the point, when I need to check for updates on my Linux machine I open Yakuake with a quick hit of F12 and type “sudo yum update” and it comes back and tells me every single thing installed on my system that has an update available, period, end of statement.  On windows, I have to launch 5-8 different apps, find their “check for updates” button/link and wait for the results (I have learned by doing this that OpenOffice.org does not notify you of a new version being released, only if there are updates for your version.  example, I have 3.1 installed, and 3.2 is now available.  clicking the check for updates menu option tells my “There are no available updates for this version” (maybe not word for word, but that is just about what it says).  I run windows update, Acrobat Update, Java update, Picasa update, Chrome update, Firefox update, and on and on… (yes I know there is an Adobe Updater, but I don’t know how to initiate it in Windows, and never cared enough to look it up, but now that I have mentioned it I sure I found instructions and have put a link to them here).

Simple and easy to manage, most distros even let you run their package manager and it has a button to click to check for updates for your system, making it easier and more time consuming all at once to do the same thing.  (Yakuake is always running and it takes me about 1.5 seconds to type that line into the terminal, it takes a lot longer to load the package manager from the application menu and then click the check for updates button, but you don’t have to type that way!)

The actual GUI interface for Windows an Linux and even MAC are so similar these days, that I don’t care which I am using as far as that is concerned.  I have come to the understanding that there will always be applications/games for an OS, other than the one I am using, that I want to use/play (take iPhone for example, they have the best Air Traffic Controller game I have played, and I’ve hunted those down and played quite a number of them, but I don’t own anything made by Apple, and probably won’t ever, unless the 2nd gen iPad totally rocks… but I will be getting an Android Tablet this year (possibly the Notion Ink Adam, or the HTC Google Chrome OS tablet), so I still probably won’t get an iPad).  My concern at this point, as I spend more and more time as a Unix Admin is maintenance.  The system I use at home needs to be practically maint free, as most Linux and Unix machines are, they will run for years without being touched by an admin, the best I know of are an AIX Server and a OpenVMS server, the AIX server has been running since 1991 and has never been patched, updated, reconfigured, or messed with in any way.  It is setup to contact a NIM server for logins, so no new users have ever been added to it, it has never crashed, never lost power, never been rebooted.  That to me is the greatest achievement of humankind (in technology anyways, and some of these companies need to take a look at the AIX OS and learn something from it!!!).  The other machine, the OpenVMS machine has been running since before 1994, but has not been patched, never been upgraded, never been rebooted, since 1994.  now I know next to nothing about OpenVMS, and have not personally logged into the machine itself, but a friend and co-worker of mine used to be the sole admin for the OpenVMS machines at that company and although that one is the only one like this, it is still running today without interference from humans.  I am sure some other machines are out there doing the same, but these are two that I know.  The longest Windows Server I have heard of running without rebooting or crashing was about 2.5 – 3 years, after which the hardware components in the server failed and the machine was replaced.  Some people have told me about Windows servers being up for 4 years and then being restarted by some new guy, but I have no validation of it and they could not give me a more exact time frame.

not sure if I made a compelling argument or not, but I need some medication and to go prop my leg up, so I am done here.  Also expecting UPS sooner or later for an over night supersave shipment… and it takes me 5 mins to get downstairs…  :)

Tagged with: • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
 

continuing on in June/July 2009…

By finndo On November 29, 2009 · 1 Comment

After this post I should catch up to the here and now pretty quick…

right, so I had (finally) Ubuntu running with all the hardware working, and started messing with wine and trying to get World of Warcraft and DDO to run.  no good that was.  both were requiring the newest video drivers from [...]

After this post I should catch up to the here and now pretty quick…

right, so I had (finally) Ubuntu running with all the hardware working, and started messing with wine and trying to get World of Warcraft and DDO to run.  no good that was.  both were requiring the newest video drivers from AMD (I think that was what was wrong, never quite figured it out…) the games would both load but would fail at some point, and have other issues… including not allowing me to login or play… :P   Well the video driver issue ended up being that (yes it did install fine) the on-board video on the laptop had just (and I do mean within a couple of weeks/a month or two) been taken out of the newest updates, and had been placed in the “legacy drivers” list.  mean while, before I actually figured this out, was installing dot net (nearly every version) into wine, and flash, and java, and all kinds of stuff.  I Was getting really excited, the laptop was working great, even if not with the OS I really wanted.  especially since I could not find this model on the inet anywhere as being functional in linux. (the wireless and audio is what normally fails to function, and I had both working in more than one flavor of linux)

then one day at work a co-worker was looking into selling an old IBM T40 laptop and we were shocked to see people paying $150 or more for them.  so I decided what the heck… I put my laptop on Craig’s list one after noon about 3pm.  I had 4 emails and 3 phone calls before 8pm that night.  decided to sell it to the first caller, they wanted win XP, so I wiped it (oh well, good learning experience) and set it up for them, then they had to postpone coming to get it, because of a dinner party they had forgotten about, then they were not sure if they could get it, and told me to not hold it for them anymore.  well I did not get it sold, and now had win XP barebonez’d on it and login ID’s setup for people who would never see it, let alone use it.

oh well, not sure if I mentioned this or not, but I started having some wierd HDD errors on my semi-new desktop PC.  failed writes, ticking noises while the drives were spinning, drives disappearing, then coming back after rebooting… it looks like I may have 2 or 3 bad HDDs.  I get all the data moved off the Seagate that was reporting bad sectors and I get an RMA setup, quick and painless… now I just need to find a box, or “original shipping packaging”  anyone who has not had this on hand and has had to look for it will know.  it’s not real easy to find a custom fitted HDD packaging that perfectly fits the box you plan on sticking it in, and has a minimum of 2″ of foam on all sides.  So I decided to ask around at work… I also submitted a tech help request with ECS, the manufacturer of my motherboard, as I was having both video problems AND HDD issues at this point.

 

on to the next issue that was going on…

so I had to go to Pittsburgh for training for work, 1 week, 2 semi-high level virtual server training courses taught by an IBM instructor (AU72 AU78 and AU73 the AIX Virtual I/O Server training.  I’ll check at work tomorrow and will update if wrong on those –updated).  had an awesome time in Pittsburgh, got to meet the team I was working with virtually, and learned a tonne of stuff. (I prefer the metric tonne to the American ton, so much more useful, and a conversation piece when used in writing… :) pictures are available on picasaweb there are not a whole lot of images (50 something), I was working (and no I did not take any images of where I was working, but there is a hint about for whom I do work.  sorry folks I might slip somewhere, but company policy severely “suggests” that I do not disclose anything about my employment that is not necessary…) most of the time (working that is, I got distracted and used one of my parenthetical explanations that I am overly fond of and are truly not necessary, nor wanted by most.  HOWEVER, and this is the good part, I am writing this, not you, and you are not paying me to do so!! SO!! I will use excessively long descriptions/mental overture if you will, at my discretion.  I sure hope WordPress has a good spell checker, cuz I make up words all the time)  umm… now where was I?

oh yeah, I was working most of the time, and so only took a few pictures, now that I no longer have a semi-pro DSLR (Canon 20D) I am stuck taking pic’s with a semi-crummy Kodak 6mp point-and-shoot.  Back to the point.. The weekend I got back from Pittsburgh, and I had to move, across the hall from a nice 1150-ish sq ft 2 BR apt to a kinda cramped 950-ish sq ft 1 BR apt.   Things got switched around, and now my Sheeva Plug fails 80% of the system checkpoints during bootup (not that I blame the move, just that I had no problems with it before this).  it still functions (ie. turns on and I can log in via the console), except the network port interface is kaput… (defined as “ka·put also ka·putt (kä-p t, -p t, k-) adj. Informal. Incapacitated or destroyed.” at www.thefreedictionary.com/kaput )  (fyi I still have not gotten around to reflashing the ROM on it, which I learned back in early june, is necessary to allow the usage of SD Media Cards.) 

 

HA! not sure what I talked about in this one, was a little distracted (doing some things on my desktop in preparation to RMA the MB…) but I’ll go ahead and post it as I hit 1k words.

Tagged with: • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
 
14 visitors online now
3 guests, 11 bots, 0 members
Max visitors today: 23 at 12:30 pm PST
This month: 23 at 02-05-2012 05:37 am PST
This year: 29 at 01-11-2012 02:49 pm PST
All time: 1100 at 08-08-2011 08:11 pm PDT
View in: Mobile | Standard